The Tramex Flooring Assessment Kit FAK is a compact kit for instant and precise moisture testing of concrete (URL: https://tramexmeters.com/moisture-testing/concrete) and wood flooring (URL: https://tramexmeters.com/moisture-testing/flooring) .
The Tramex Concrete Moisture Encounter CMEX5 digital moisture meter allows for non-destructive quantitative testing of the moisture content (URL: https://tramexmeters.com/moisture-testing/concrete/non-destructive-concrete-moisture-test) of the top inch of concrete slabs and comparative testing per ASTM F2659.
The Tramex heavy-duty wood pin-probe measures the moisture content of wood.
An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the CMEX5 hygrometer for a Quick Check procedure at the time of install (URL: https://tramexmeters.com/moisture-testing/concrete/flooring-installation-quick-check-test) .
The Tramex Moisture Encounter ME5 allows for non-destructive moisture testing of wood and includes a shallow-depth feature to eliminate the effect of the substrate (URL: https://tramexmeters.com/learn/checking-installed-floors-with-the-me5-on-shallow-depth) when needed.
The Flooring Assessment Kit FAK comes with calibration check plates for both moisture meters and an extension handle in a heavy duty Tramex travel case.
The Tramex Meters App connects by Bluetooth to the meters and allows you to GeoTag test results (URL: https://tramexmeters.com/learn/geotag-feature-in-the-tramex-meters-app-and-the-5-series-meters) , create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places.
Concrete Moisture Encounter X5 - CMEX5 - Measuring Range:
Depth of penetration in concrete: | approx. ¾" (20mm)
Moisture content for Concrete: | 0 → 6.9 %
Comparative for Gypsum floor screed: | 0 → 12
CM Equiv Anhydrite/Concrete: | 0→2.7 / 0→4.3
Reference scale: | 0 → 100
Relative Humidity: | 0 → 99%
(with optional Hygro-i2 ® probe): | Humidity accuracy: 0% → 99%RH +/- 2% @ 25°C / 77°F
Moisture content for wood (with optional wood pin probes): | 5 → 30 %
Moisture Encounter 5 - ME5 - Measuring Range:
Wood Moisture Content: | 5 to 30%
Reference scale for building materials: | 0 to 100
Depth of penetration: | Shallow signal: up to ⅜” (10mm)Deep signal: up to 1¼" (30mm)
Infrared Thermometer IRT2
Temperature range: | -58ºF ~ 1202ºF (-50 to 650 ºC)
Distance to Spot ratio: | D:S = 12:1
Display resolution: | 0.1 ºF(0.1ºC) <1000 1ºC >1000
Accuracy for targets: | Assumes ambient operating temperature of 73 to 77ºF (23 to 25 ºC) -58ºF ~ 68ºF (-50 ~ 20ºC)±4.5ºF (2.5ºC) 68ºF ~572ºF (20ºC ~300ºC) ±1.0% ± 1.8ºF (1.0ºC) 572ºF ~ 1202ºF (300ºC ~650ºC) ±1.5%
Repeatability: | -58~68ºF (-50~20ºC) : ± 2.3ºF (1.3ºC) 68~1202ºF (20~650ºC) : ±0.5% or ±0.9ºF (0.5ºC)
Response time: | 150ms
Spectral response: | 8~14um
Emissivity: | Digitally adjustable from 0.10 to 1.0
Over range indication: | LCD will show “----”
Polarity: | Automatic (no indication for positive polarity); Minus (-) sign for negative polarity
Diode laser output: | <1mW,Wavelength 630~670nm, Class 2 laser product
Operating temp.: | 32 to 122ºF ( 0 to 50ºC)
Storage temp.: | 14 to 140ºF (–10 to 60ºC)
Relative humidity: | 10%~90%RH operating, <80%RH storage
Power supply: | 9V battery, NEDA 1604A or IEC 6LR61, or equivalent
Safety: | “ CE ” Comply with EMC
Specifications of Kit:
Size: | 16.5” x 14.2” x 5.5” (42cm x 36cm x 14cm)
Weight: | 9.5lbs (4.3kg)
Power: | 4 x AA batteries, 1 x 9 volt PP3 battery
